75' HDMI Active Cable w/ Ethernet, CL3, 24AWG, 10.2 Gbps
The KanexPro HD75FTCL314 is a high quality 75' active HDMI cable with Ethernet and integrated booster, the cable is CL3 rated for in-wall installation. The built-in booster does not require an external power, since it is using the 5-volt from pin-18 on the HDMI cable extracting the power from the display. The cable is a large 24AWG with a copper wire build, this allows for the highest level of transmission possible with no interference. The cable features triple layer shielding and active amplification integrated into the cable to eliminate impedance mismatch caused by the cable attenuation, dielectric losses, and compensation for skin effect over long distances. For perfect end to end transmission, the output of the cable is placed at the end of the display to amplify full signal transmission with no signal loss.
The cable also supports 3D and up to 4K, data rates up to 10.2 Gbps, 48 bit color depth, and is HDCP compliant. If you want an HDMI cable that you can install anywhere and not have to worry about interference or signal loss, look no further.
- Length: 75'
- No external power but needs to draw 5V power from display
- Data rates: Up to 10.2 Gbps
- Color Depth Support: 30 bit, 36 bit and 48 bits (16 bits per color)
- HDCP compliant
- Supports 3D and 4Kx2K
- HDMI Cable Diameter: 0.37" (9.5mm)
- HDMI Connector: 0.55" H x 0.8"W x 1.5"L
- Built-in Signal Repeater: 0.6"H x 1.00"W x 3.1"L
- Weight: 5.10lbs
- Warranty: 1 year