Liberty AV DL-AR-VGA
DL-AR4202 VGA to HDMI Adapter Ring
- Ring includes the following 5 adapters and HDMI cable clamp (HDMI cable not included), ships pre-assembled:
- 1 VGA to HDMI 8" dongle adapter
- 1 Full sized DisplayPort male to HDMI female
- 1 Mini HDMI "C" male to HDMI female
-Patrick S.
Description
The Liberty AV DL-AR-VGA is a Multi-Format to HDMI adapter ring which can be used for VGA to HDMI connection, it locks on to the end of your existing HDMI cable and provides 5 adapters conveniently located and easy to use. Your adapters can no longer be lost or stolen, the high strength steel cable securely attaches to your HDMI cable so your adapters are always ready to use. Just grab the adapter from the ring you need and plug into your HDMI cable, it is easy as that. There is no signal loss using any of the adapters, your picture quality will remain the same. Perfect for your presentations, the DL-AR-VGA has every video format covered. The adapters are sleek and take up little space, they are all plug and play with no software required. The security clamp attaches to any HDMI cable ranging from micro 4mm thick to large 11mm thick HDMI cables. Use a Torx T10 screw driver (not included) to attach the ring to the HDMI cable, if you need this please purchase part number T10PD. The VGA to HDMI adapter has a USB connection on it that typically needs to be plugged into your laptop to achieve full 1080P video, on a Windows PC it will also pass audio.
Includes the ring, HDMI clamp, and all the below adapters. The ring ships pre-assembled, just attach your HDMI cable and you are ready to use:
1 VGA to HDMI 8" dongle adapter
1 Full sized DisplayPort male to HDMI female
1 Mini HDMI "C" male to HDMI female
1 Micro HDMI "D" male to HDMI female
1 Mini-DisplayPort male to HDMI female
***In stock***
Specifications
- 1 Micro HDMI "D" male to HDMI female
- 1 Mini-DisplayPort male to HDMI female
- *Does not include HDMI cable in picture
- Also includes: Four T-10 screws, Four M3 nuts, one retaining ring, one 1.5 mm hex retaining screw, 2 sets of foam rubber inserts for varying diameter HDMI cables
- Security: Clamp cannot be opened or installed without a Torx T10 Pin driver
- Attaches to HDMI cables from 4mm to 11 mm thick
- Warranty: 2 years
Reviews
Name: | Pete E. |
Rating: | |
Date: | May 15, 2018 |
perfect with the vga to hdmi adapter |
Name: | Randall |
Rating: | |
Date: | November 10, 2016 |
I was a little hesitant on how well the VGA would work but so far so good. These have been an affordable and reliable solution for our conference room connection needs. |
Name: | Keith |
Rating: | |
Date: | May 19, 2016 |
We have utilized several of these in the conference rooms around our building and they all work great. |