AVPro Edge AC-EX70-444-RNE-P
70M 18Gbps HDBaseT Receiver with Power Supply
Description
The AVPro Edge AC-EX70-444-RNE-P is an HDBaseT receiver made to work with AVPro Edge HDBaseT transmitters, and it includes a 48V DC power supply. The product uses the same receiver popularly paired with AVPro Edge's 18 Gbps ICT matrix switchers, but the included power supply makes it suitable for standalone use, where no matrix output is available to power it, for example with a compatible AVPro Edge transmitter.
AVPro Edge's Invisible Compression Technology (ICT) lets the receiver deliver 4K60 4:4:4 with HDR up to 70 meters (230 ft) and 1080p up to 100 meters, with deep color and HDR metadata intact, without banding or color shifts.
The company first showed that an 18 Gbps, 4K60 4:4:4 signal could cross twisted-pair copper artifact-free, and this receiver extends that signal to 70 meters.
Like other 444 products in the family, the receiver provides bidirectional IR and RS-232 management and onboard troubleshooting patterns to verify wire runs, switcher settings and source viability. If the receiver is to be powered by a matrix output, you can save the extra supply with the standard AC-EX70-444-RNE. If you need a matched transmitter and receiver for point-to-point use, check out the AC-EX70-444-KIT.
Key Features
- Includes 48V power supply: ready for standalone use without a matrix output.
- ICT at 18 Gbps: 4K60 4:4:4 HDR with deep color and metadata intact.
- Reach: 70 m at 4K60 4:4:4 and 100 m at 1080p.
- Bidirectional control: IR and RS-232 in both directions.
- Test patterns: built-in troubleshooting aids.
- Matrix-ready: works with AVPro Edge's HDBaseT transmitters and matrix switchers.
Design and Installation Notes
Video and audio details: the receiver supports resolutions up to DCI 4K (4096x2160) and 4:4:4, 4:2:2 and 4:2:0 chroma. It is a close sibling of the AC-EX70-444-RNE; the main difference is that this version includes the 48V power supply, so it can run without a matrix output nearby. Choose it when the receiver sits where no powered source is available.
Typical Applications
Good for standalone remote displays, spare receivers for a matrix system and any location without a powered source. Browse more HDBaseT receivers.
Frequently Asked Questions
What is the difference between the RNE and RNE-P?
The RNE-P includes a 48V DC power supply for standalone use. The RNE is powered through a compatible matrix output.
How far can it receive 4K60 4:4:4?
Up to 70 meters (230 ft), with 1080p reaching 100 meters, over category cable.
Can I pair it with the AC-CXWP-HDMO-BKT wall plate kit?
No. The AC-CXWP-HDMO-BKT is a matched kit that uses Power over Cable and does not work with other HDBaseT products. Pair the RNE-P with AVPro Edge HDBaseT transmitters.
Does it pass IR and RS-232?
Yes, both are managed bidirectionally.
