1,000+ 5 star ratings on Shopper Approved
 Home > Just Added -> HDBaseT Matrix -> AVPro Edge -> AC-CX62-AUHD ConferX 4K 6x2 Matrix Switcher

AVPro Edge AC-CX62-AUHD
ConferX 4K 6x2 Matrix Switcher

Part #: AC-CX62-AUHD
Satisfaction Guaranteed!
Our Price: $1,987.00
Free Shipping* | 30 Day Returns* | Authorized Dealer
Coupon
Click for 10% off!
"Quick and easy to find what I was looking for."
-Brandon K.
Contact a product specialist!
Proudly supporting our customers since 2008

Description

The ConferX AC-CX62-AUHD is a 6x2 matrix switcher for conference rooms, classrooms and huddle spaces. It takes six video sources and has two independent outputs, one HDMI and one HDBaseT, so two sources can show at once.

Two of the six inputs are HDBaseT. They pair with ConferX wall plate transmitters, such as the AC-CXWP-HDMO-T or AC-CXWP-USBC-T, so a laptop connection can sit away from the rack. Those transmitters reach up to 100 m at 1080p or 70 m at 4K on Cat 6A. Auto mode switches to the most recently connected device, and each output also has a front-panel button.

HDBaseT links run at 10.2 Gbps with ConferX wall plates and some receivers, or 18 Gbps with others, so match endpoints to your sources. HDCP 2.2 and earlier are supported.

Audio extraction can be tied to either output. The box includes a 48 V power supply, an IR remote, an IR extension cable, mounting brackets and terminal connectors. The unit draws up to 12 W, measures 8.69 x 6.25 x 1.63 inches and weighs 2.4 lb. It operates from 23 to 125 F.

Key Features

  • HDMI bandwidth up to 18 Gbps
  • HDBaseT bandwidth depends on the connected endpoint
  • Balanced mic/line input with 48 V phantom power
  • TOSLINK and balanced stereo audio outputs
  • Audio delay up to 630 ms
  • Power over HDBaseT to connected endpoints
  • LAN, RS-232 and IR control, with a web interface

Typical Applications

Suited for bring-your-own-device rooms that need a simple "leave in the room" switcher, with the option of adding a control system later.

Frequently Asked Questions

Does it have a microphone input?

Yes. One balanced mono input handles line level, dynamic microphones or microphones needing 48 V phantom power. Check the manual for audio routing options.

Which HDBaseT receiver should I use?

The AC-EX70-444-RNE-P supports 18 Gbps, up to 100 m at 1080p and 70 m at 4K. Other receivers have lower ratings.

Does it downmix audio?

No. The analog output is 2-channel PCM only. A multichannel source needs a stereo setting or an external downmixer.

Do wall plates need their own power?

Often not. The matrix can power HDBaseT endpoints through PoH, reducing extra power supplies.

Q & A

This product has no questions - ask one!

Ask a Question

Reviews

There are currently no reviews for this product.

Write a Review

 
Customer Reviews
Conference Room AV
1775 W. State St. #189
Boise, ID 83702
Toll Free: (888) 999-3759
Fax: (888) 955-1788
Shopping
Table Boxes
Floor Boxes
HDMI Adapters
Pop Up Outlets
All Products
About Us
Audio Video Distribution
Customer Reviews
Installation Request
Frequently Asked Questions
Contact Us
888-999-3759 - ConferenceRoomAV.com 2026 ©