Hall Technologies
U97-Ultra-2B-R
Video, Audio, RS-232, USB Console Extender - Receiver
- Inputs: 3 x UTP Cat
- Outputs: 2 x VGA, USB Keyboard and Mouse, USB Hub, Full speed USB x 2, RS-232, Line Level + powered audio
- Video Inputs: PC outputs (VGA to WQHD)
- Resolutions: PC resolutions up to 2560x1440 @ 60 Hz
Description
The Hall Research Model U97-Ultra-2B-R All-In-One Console Extender Receiver. This device has been designed to extend Dual Display PC Video, Stereo Audio (amplified or line level), RS-232 and up to 3 independent USB ports to a remote location up to 500' away using any Category Cable (Cat5e/6 etc..). This receiver combines the functions of the Hall Research U97-H2, UU2X4, two SKU-RGB, DVC-3 video test pattern generator all in one device and eliminates the need for Utility Box as the receiver includes a guard plate that goes over all the connectors with zip-tie provisions. It does not require an external power supply as it has a built-in supply with standard 110-240 VAC IEC320 jack. Additionally it includes 2 "direct" USB ports (DR1 & DR2), and a Standard with Hub at receiver. There is a DB15 connector for amplified audio input and loop output at the sender as well as DB15 output at the receiver to directly drive pass speakers. This device also contains a built-in video Skew Correction on both video channels. This corrects the lacks of RGB convergence when long Cat6 cables are used and eliminates the need to use special low-skew UTP cables for long runs.
Specifications
- UTP Cable: Up to 330' using any Cat5e or 500' using Cat6
- USB Support: High Speed devices (12Mb/s) | Low Speed devices (1.5Mb/s) | High Speed devices on DR1 and DR2 only (480Mb/s)
- Includes 2 "Direct" USB ports (DR1 & DR2), and a Standard with Hub at receiver
- DB15 connector for Amplified audio input and loop output at the sender as well as DB15 output at the receiver to directly drive passive speakers
- Built-in video Skew Correction on both video channels. This corrects the lacks of RGB convergence when long Cat6 cables are used. Eliminates the need to use special low-skew UTP cables for long runs
- Built-in Test pattern generator for long cable compensation (High Frequency Gain) and Skew correction
- Supports DDC channel with EDID (Extended display ID) Enclosure: Steel
- MTBF: 90,000 Hours
- Does not require external power supply (built-in supply with standard 110~240 VAC IEC320 jack)
- Power: 100VAC to 240 VAC 50/60Hz
- Dimensions (HxWxD): 1.75 x 14 x 4.06" Weight: 3lbs
- Warranty:




