WyreStorm NHD-100-TX
NetworkHD 100 Series AV Over IP Encoder

Description

Wyrestorm's NHD-100-TX is a source device encoder for the NetworkHD 100 Series, an ultra low bandwidth H.264 AV over IP solution for distribution of point-to-point, one-to-many and many-to-many AV distribution over a managed network. With its standards-based approach to video encoding, simple system configuration and robust feature set, it provides the best value in networked video distribution.

The NHD-100-TX H.264 encoder is intended for use with an NHD-100-RX H.264 decoder (sold separately) to provide a complete end-to-end video distribution system. It is also compatible with the NHD-000-CTL system controller, NHD-220-RX multiview decoder.

Ideal for the following settings:

• Hospitality
• Corporate
• Venues
• Retail

Specifications

• Output Video Encoding: H.264/MPEG-4 AVC
• Video Resolutions (Max) Note: All source content must be progressive
• HDMI: 1920x1080p @60Hz 8bit (15m/50ft)
• Cat6/6a/7: 1920x1080p @60Hz 8bit (100m/328ft Point to Point)
• Encoding Data Rate: 2~30Mb/s
• End to End Latency 60~90 ms (Low latency mode) | 250~300 ms (High quality mode)
• Color Depth: 8bit
• Maximum Pixel Clock: 150MHz
• HDMI: HDMI | HDCP 1.4
• Ethernet: 1x 8-pin RJ-45 female | 10/100Base-T | PoE
• RS-232: 1x RS-232: 3-pin Phoenix
• Power Supply: 12V DC 1A
• PoE IEEE 802.3af | 12V 1A 12.95W
• Max Power Consumption: 6W (DC adapter)
• Dimensions & Weight Specifications
• Rack Units/Wall Box: <1U
• Height: 1 inch
• Width: 8 inches
• Depth: 4 inches
• Weight: 2 lbs
• Warranty: 5 years

Downloads

• WyreStorm NHD-100-TX Specifications (PDF)

Q & A

Reviews