FLEX I/O Interface Unit, 16 Ground Closure Inputs, Lamp Outputs
The FSR FLEX-I/O-16 is a control processor that features 8 contact closure inputs, and 8 LAN outs, It also has an IP and serial port which gives you the capability to take a contact closure port and output an IP or serial signal. Alternatively you can use serial in and IP out, the uses are endless making this unit extremely flexible for any installation where control is needed.
Configuration of the Flex-IO16 is accomplished through the use of the Flex-IO Builder GUI. The Flex-IO builder can create, edit, debug, upload and download projects, and can also be used to verify wiring and control in installed systems. The Flex-IO builder connects to the Flex-IO16 via the second dedicated RS-232 "Program" port, or integrated Ethernet connection.
Each of the 16 switch inputs can be configured to execute command strings up to 250 characters in length upon the press, hold, or release of the switch, or they can alternate between two different strings when set to alternate action mode. The 16 lamp outputs can be independently configured to turn on, off, blink or toggle state in response to any of the switch input events, or they can be remotely commanded via serial or IP.
- Configure via Serial or IP
- Full featured GUI supports system configuration & debug
- Independent serial ports for Program and Control
- Indicators for serial/IP activity, power and status
- Fully programmable
- Warranty: 3 years