Aurora IPX-TCW3-C-B
4K Streaming Transceiver Wall Plate w/ IPBaseT, 2x1 HDMI I/O
- HDMI Inputs: 2
- HDMI Outputs: 1
- Video Compression: Zero
- Video Latency: Zero
Description
Aurora's IPX-TCW3-C-B is the most advanced IP streaming solution available. It applies Aurora's proprietary IPBaseT technology to combine IP and AV standards in a single device. The IPIX-TCW3 includes an SPF+ port that can use single or multi-mode fiber. It can also use CAT5e/6/6A cables. The wall plate is based on a BlueRiver NT platform, which enables 4K2K IP wall plate capabilities.
The IPX-TCW3-C-B can be set up as either a transceiver or receiver, and it features Extreme USB (USB2.0 over IP) and Dante audio. Dante audio provides a more complete distributed audio system. Send audio, video, data, or control via 10G fiber or CAT Ethernet switches. When functioning as the transceiver, the IPX-TCW3 employs its two HDMI inputs to act as a source switch. In this case, the HDMI output would provide a loop out. When functioning as the receiver, local HDMI inputs or IP can be used as a source. Whether behaving as the transceiver or receiver, the IPX-TCW3 enables you to de-embed audio, breakaway, or transmit to or from a Dante-enabled device.
- 4K2K Over 10G Fiber (-F) or 10G CAT (-C)
- Zero compression and zero latency
- Secure content encryption
- 128x128 capable with HDCP, larger for non-encrypted sources
- Video wall capability
- Seamless breakaway switching
- SFP+ for Multi/Single Mode Fiber (-F Model)
- 1G LAN PoE
- Line In/Out Stereo
- RS-232 Serial Port and IR (Bidirectional)
- User-configurable OSD
- Integrated web server for custom control pages
- Programmable front buttons
- Auto sense switching
Specifications
- Audio Analog: Stereo Line In/Out (3.5mm TRS)
- 10G Fiber Ethernet: SFP+ (Single Mode or Multi-Mode)
- 10G Copper Ethernet: RJ-45 330ft with CAT 6A
- LAN: RJ-45 10/100/1000M PoE (PSE)
- Video Bandwidth: 340MHz
- Video Support: Up to 4K2K 4:2:0 @60Hz
- Audio Support: Up to 32 channels and breakaway capable
- RS-232: Up to 115k Baud (3.5mm TRS)
- IR: Bi-Directional (3.5mm TRS)
- USB Connector: USB 2.0 Type A (host or device software selectable)
- Expansion Port: SO-DIMM for ExtermeUSB or Dante Options
- Interface: IR or Keypad via OSD, Webserver
- Digital Video Connectors: 2 HDMI in, 1 HDMI out, 1 stereo line in (3.5mm TRS), 1 stereo line out (3.5mm TRS)
- Data Connectors: 1 Ethernet port for network, 1 USB port for charging and ExtremeUSB option
- IR: 20KHz-60KHz
- Serial: Up to 115K Baud
- Size: 3 gang
- Dimensions: 5.54" x 2.83"(4.331" with tabs) x 1.404"
- Dimension Note: Wall box portion depth 1.0" without option card and 2.25" with option card
- Weight: 2.5 lbs
- Power: 48V DC (2-pin Euro)
