WyreStorm NHD-200-TX
NetworkHD 200 Series AV Over IP Encoder
Part #: NHD-200-TX
This product has been discontinued
Suggested Replacement:
Top NHD-200-TX Specifications
- Inputs: 1x AV IN: 24-pin DVI/I | 1x Line In: 3.5mm (1/8in) TRS Stereo
- Outputs : 1x LAN (PoE) 8-pin RJ-45 female | 10/100Base100/1000Base-T | 1x Audio Out: 3-pin Phoenix
- Audio Formats: 2ch PCM
- Output Video Type: H.264/MPEG-4 AVC
"Quick and easy checkout and great prices. Will look here again."
Contact a product specialist!
Proudly supporting our customers since 2008
Description
Wyrestorm's NHD-200-TX is a source device encoder for the NetworkHD 200 Series. Featuring an ultra-low bandwidth H.264 AV over IP solution with all the functionality of the NetworkHD 100 series but with a multi-format DVI-I input supporting transmission of DVI, HDMI, Component, and VGA signals.
The NHD-200-TX H.264 encoder is compatible with any NetworkHD 100 or 200 series decoder to provide end-to-end streaming to individual displays or video wall decoding with the NHD-210-RX. It is also compatible with the NHD-000-CTL system controller.
This encoder is ideal for the following environments:
- Education
- Hospitality
- Government
- Corporate
- RTOC (Regional Technical Operation Center)
- Retail
Specifications
- Video Resolutions (Max) Note: All source content must be progressive. HDMI: 1920x1200p @60Hz 8bit (15m/50ft) / Cat6/6a/7: 1920x1200p @60Hz 8bit (100m/328ft Point to Point)
- Encoding Data Rate: 230Mb/s
- End to End Latency: 60~90 ms (Low latency mode) | 250~300 ms (High quality mode)
- Color Depth: 8-bit
- Maximum Pixel Clock: 150MHz
- HDMI: HDMI | HDCP 1.4
- Ethernet: 1x 8-pin RJ-45 female | 10/100Base-T | PoE
- RS-232: 1x RS-232: 3-pin Phoenix
- Power Supply: 12V DC 1A
- PoE: IEEE 802.3af | 12V 1A 12.95W
- Max Power Consumption: 6W (DC adapter)
- Rack Units/Wall Box: 1U
- Height: 0.98in
- Width: 8.98in
- Depth: 4.37in
- Weight: 1.32lbs
- Warranty: 5 years
Reviews
There are currently no reviews for this product.
Write a Review
Related Items