WyreStorm TX-H2X-HDBT
HDBaseT Input and HDBaseT Output Card
Part #: TX-H2X-HDBT
Satisfaction Guaranteed!
Our Price:
$1,105.00
Top TX-H2X-HDBT Specifications
- Audio and Video
- Inputs: 1x HDMI In19-pin type A / 1x S/PDIF In Coaxial Digital / 1x HDBaseT 8-pin RJ-45 female
- Outputs: 1x HDBaseT 8-pin RJ-45 female / 1x S/PDIF Out Coaxial Digital / 1x Audio Out 3pin Phoenix Connector
- Outputs Video Encoding: HDBaseT Class A
"Great support and help from technical support!"
-Patrick S.
-Patrick S.
Contact a product specialist!
Proudly supporting our customers since 2008
Description
Wyrestorm's TX-H2X-HDBT input and output card allows users to de-centralize sources connected to the H2X matrix platform. The TX-H2X-HDBT sends 4K UHD transmissions from 230 feet, allowing source devices to remain in place while integrating them into the main distribution system.
The TX-H2X-HDBT input and output card is ideal in educational, governmental, corporate, and residential environments. The following attributes are key features of the TX-H2X-HDBT input/output card:
- HDBT Input - Enables direct connection from a remote source to the matrix via an HDBaseT transmitter at the source location. Then, the matrix routes the remote source signal
- HDBaseT Output - Transmits Class A HDBaseT signal, including video, audio, control, and power 4K signal up to 230 feet and 1080p signal up to 328 feet
- HDMI Output - Mirrors to HDBaseT, allowing for additional local display device connection, AVR, or to extend with a hybrid active optical HDMI cable
- Stereo Audio Output - Offers stereo audio with a 3-pin phoenix connector for analog audio
- S/PDIF Output - Supports 5.1 audio content de-embedded from sources or ARC from connected zones
- S/PDIF Audio Input - Injects digital audio to fully enjoy the H2X platform’s powerful audio matrix and DSP
- IR RX - Allows control signals to be sent to the sink device
Specifications
- Encoding Data Rate: 9.2Gbps
- End to End Latency: 10 s (micro seconds)
- Audio Formats: 2ch PCM | Multichannel: LPCM and Up to DTS-X and Dolby Atmos Video Resolutions (Max) Video Resolutions: 4096x2160p @60Hz 8bit 4:4:4
- Supported Standards: DCI | RGB | HDR | HDR10 | Dolby Vision up to 30Hz | HLG | BT.2020 | BT.2100
- Maximum Pixel Clock: HDMI: 600mHz | HDBaseT: 297MHz
- Communication and Control
- HDMI: HDCP 2.2 | DVI-D supported with adapter (not included)
- HDBaseT: HDMI | HDCP 2.2 | 1-way PoH to Receiver | IR RX to Receiver
- IR: 1x IR RX 3.5mm (1/8in) TRS Stereo | To Receiver over HDBaseT
- RS-232: Matrix Control | Bidirectional over HDBaseT | Firmware Updates
- Ethernet: From Matrix - No Connection on card | Bidirectional over HDBaseT
- ARC (Audio Return Channel): Returns audio from displays built-in applications via ARC HDMI Input over HDBaseT (Requires ARC or SCL Receiver)
- Power
- Power Supply: Internal to Matrix
- Max Power Consumption: Matrix Dependent
- PoH: 48V 15.4W
- Regulatory Safety and Emission: Matrix Dependent
- Warranty: 5 years
Reviews
There are currently no reviews for this product.
Write a Review
Related Items