AVPro Edge AC-SW411-AUHD
18G 4K60 4:4:4 4X2 Switch HDMI 2.0, Mirrored HDBaseT Output

Description

The AC-SW411-AUHD by AVPro Edge is a true 4X1+1(HDBaseT) 4K60 4:4:4 HDMI Switch. This is an ideal solution for digital entertainment centers, conference/trainings centers, classrooms, and show sites where it is necessary to maintain high-quality audio and video content from your source to your displays. With a 4K video resolution and up to 18Gbps this switch from AVPro Edge allows any source whether it be Blu-Ray, UHD Blu-Ray, PC's, Gaming Consoles, Satellite Receivers to be shown on any of the connected displays. While this switch supports HDMI 2.0a and HDCP 2.2 it also comes equipped with its own built in Scaler, meaning the user will not have to give up that 4K signal due to a few older displays that may be connected to the system. Avoid being budget constrained by an all or nothing upgrade to your current setup, with a Full EDID Management you will have the maximum flexibility to continue to operate with a wide range of sources and displays. Upgrade and progress as it suits your business. 

Also featured by the AC-SW411-AUHD is a mirrored HDBaseT Output for future scenarios and longer runs to keep a consistent picture and audio quality from your sources. Can be controlled through IR Remote and RS-232 Control, as well as a front panel control set. Supports HDMI Audio (Lossless) and has Analog and Digital Audio Breakouts. Rounding out this high-end switcher is a feature rich IP GUI Controller, oh and did we mention a Full 18G Support, HDR and 4K60 4:4:4!!

Specifications

• Supports HDMI Audio: Analog and Digital Audio Breakouts
• IR In and Out jacks, Locking style Phoenix Connector 3-20 VDC
• EDID Management: Rotary Switch & Web Interface
• Ease of use: Installs in seconds, feature rich IP GUI Controller
• 48v IEEE PoE Certified
• Warranty: 10 Years

Downloads

• AVPro Edge AC-SW411-AUHD Specifications (PDF)

Q & A

Reviews